SKU: _ZI020425

£6.13 Excl. VAT

Add to Wishlist
Add to Wishlist


  • Superior quality oil, similar to Raw Linseed, but has had hot air passed through to improve drying times

  • Ideal for use with all types of wood (except exterior oak)

  • Provides a traditional hard wearing finish

  • Traditional sealer for terracotta and stone floors


For ease of application dilute the first few coats with turpentine (up to 30%). Rub well into the wood using a lint-free cotton cloth. After about 20 minutes, wipe off the excess with a clean lint-free cloth. Failure to do so will prevent penetration of future coats and leave a sticky surface. Repeat the previous steps once or twice at 24 hour intervals. Apply a final coat of Boiled Linseed Oil, again wiping off any excess. Allow this final coat to harden for a few days before use. A light rubbing in between coats with Ultra Fine Steel Wool (Grade 0000) will improve results. If the surface becomes damaged, work in a new coat.


Oil finishes bring out the natural colours of timber. A wet surface will be an indication of the final colour. Always test the product on a spare surface or inconspicuous area for colour, compatibility and end result.

Cleaning and maintenance?

Wipe the surface with a damp cloth and buff dry. Re-oil as and when required depending upon usage.


Store Boiled Linseed Oil at a temperature above 5°C. Always replace the lid otherwise the oil can deteriorate.?Oily cloths can self-combust. Do not leave impregnated cloths in bundles. Before discarding the cloths lay them flat outside to dry to avoid a fire hazard.?If the excess is not removed and the surface becomes sticky, wipe with white spirit to remove the sticky film and allow to dry before continuing.

Customers' review

5 stars 0 0 %
4 stars 0 0 %
3 stars 0 0 %
2 stars 0 0 %
1 star 0 0 %


There are no reviews yet.

Only logged in customers who have purchased this product may write a review.

Product Questions & Answers

No questions have been asked about this product. Be the first!